ZyXEL Communications NU-AP699E9N3 User Manual page 151

Table of Contents

Advertisement

NU-AP699E9N3 Wireless Router User Manual
Check whether the IP address of the network adapter and that of NU-AP699E9N3 are in
the same network segment. Manually set the IP address of your network adapter in the
network segment of 192.168.100.2/253 according to procedures described in Chapter 5
"Configuring Your Computer and Wireless Connection". Choose Network Settings > LAN
Interface Settings and set the IP address of NU-AP699E9N3 in the same network
address as that of the domestic network gateway.
7
WPS connection fails.
Ensure that one and the only WPS device connected to NU-AP699E9N3 starts the WPS
session within 2 minutes. Note the WPS difference between NU-AP699E9N3 serving as
the uplink AP and that as the downlink client device in the Repeater mode (see section
9.5.2 "WPS Setup"). Refer to Table 4.1 for description on WPS indicator status.
142

Advertisement

Table of Contents
loading

Table of Contents