Making Settings For The Printer's Fax Features According To Use - Epson WorkForce WF-2930 Series User Manual

Faxing
>
Before Using Fax Features
Related Information
"Connecting the Printer to a Phone Line" on page 70
&
"Making Settings to Use an Answering Machine" on page 76
&
"Receive Mode:" on page 220
&
"Making Settings to Receive Faxes Operating Only a Connected Phone (Remote Receive)" on page 76
&
"Basic Settings Menu" on page 219
&

Making Settings for the Printer's Fax Features According to Use

You can configure the printer's fax features individually using the printer's control panel according to use. The
settings made using Fax Setting Wizard can also be changed. For more details, see the descriptions of the Fax
Settings menu.
Related Information
"Fax Settings" on page 218
&
"Receiving Incoming Faxes" on page 87
&
"Making Settings for a PBX Phone System" on page 75
&
"Making Settings When You Connect a Phone Device" on page 76
&
"Making Settings for Blocking Junk Faxes" on page 77
&
"Making Settings to Send and Receive Faxes on a Computer" on page 77
&
Making Settings for a PBX Phone System
Make the following settings when using the printer in offices that use extensions and require external access codes,
such as 0 and 9, to get an outside line.
1. Select Settings on the printer's control panel.
To select an item, use the
2. Select Fax Settings > Basic Settings.
3. Select Line Type, and then select PBX.
4. When sending a fax to an outside fax number using # (hash) instead of the actual external access code, select
Use as the Access Code.
The # entered instead of the actual access code, is replaced with the stored access code when dialing. Using #
helps avoid connection problems when connecting to an outside line.
Note:
You cannot send faxes to recipients in Contacts in which an external access code such as 0 or 9 is set.
If you have registered recipients in Contacts using an external access code such as 0 or 9, set the Access Code to Do Not
Use. Otherwise, you must change the code to # in Contacts.
5. Enter the external access code used for your phone system, and then press the OK button.
>
Making Settings for the Printer's Fax Features According to Use
u d l r
buttons, and then press the OK button.
75