Epson WorkForce WF-2930 Series User Manual page 142

Solving Problems
The printer port is not set correctly.
Solutions
Click Print Queue on the printer driver's Maintenance tab.
Make sure the printer port is set correctly as shown below in Property > Port from the Printer menu.
USB connection: USBXXX, Network connection: EpsonNet Print Port
Cannot Print Even Though a Connection has been Established (Mac OS)
The following causes can be considered.
There is a problem with the software or data.
Solutions
❏ Make sure that a genuine Epson printer driver (EPSON XXXXX) is installed. If a genuine Epson
printer driver is not installed, the available functions are limited. We recommend using a genuine
Epson printer driver.
❏ If you are printing a large data size image, the computer may run out of memory. Print the image at a
lower resolution or a smaller size.
❏ If you have tried all of the solutions and have not solved the problem, try uninstalling and then
reinstalling the printer driver.
❏ You may be able to clear the problem by updating the software to the latest version. To check the
software status, use the software update tool.
"Checking if a genuine Epson printer driver is installed - Windows" on page 116
&
"Checking if a genuine Epson printer driver is installed - Mac OS" on page 117
&
"Installing the Applications Separately" on page 115
&
>
Cannot Print, Scan, or Fax
>
The Application or Printer Driver do not Work Properly
142