Epson WorkForce WF-2930 Series User Manual page 153

Solving Problems
The installation location is inappropriate.
Solutions
Place the printer on a flat surface and operate in the recommended environmental conditions.
"Environmental Specifications" on page 232
&
Unsupported paper is being used.
Solutions
Use paper supported by this printer.
"Available Paper and Capacities" on page 203
&
"Unavailable Paper Types" on page 205
&
Paper handling is inappropriate.
Solutions
Follow paper handling precautions.
"Paper Handling Precautions" on page 26
&
Too many sheets are loaded in the printer.
Solutions
Do not load more than the maximum number of sheets specified for the paper. For plain paper, do not
load above the line indicated by the triangle symbol on the edge guide.
"Available Paper and Capacities" on page 203
&
The paper settings on the printer are incorrect.
Solutions
Make sure the paper size and paper type settings match the actual paper size and paper type loaded in the
printer.
"Paper Size and Type Settings" on page 26
&
Paper Feeds at a Slant
The following causes can be considered.
The paper is loaded incorrectly.
Solutions
Load paper in the correct direction, and slide the edge guide against the edge of the paper.
"Loading Paper in the Rear Paper Feeder" on page 28
&
Several Sheets of Paper are Fed at a Time
The following causes can be considered.
>
Cannot Print, Scan, or Fax
>
Paper Does Not Feed Properly
153