Making Settings Individually For Printer's Fax Features; Setting Receive Mode - Epson ET-M3140 Series User Manual

User's Guide
Note:
❏ If there are any errors reported, follow the instructions on the report to solve them.
❏ If the Select Line Type screen is displayed, select the line type.
- When you are connecting the printer to a PBX phone system or terminal adapter, select PBX.
- When you are connecting the printer to a standard phone line, select PSTN, and then select Do Not Detect on the
Confirmation screen displayed. However, setting this to Do Not Detect may cause the printer to skip the first digit of
a fax number when dialing and send the fax to the wrong number.
Related Information
"Connecting the Printer to a Phone Line" on page 41
&
"Setting Receive Mode" on page 46
&
"Making Settings to Use an Answering Machine" on page 48
&
"Making Settings to Receive Faxes Operating Only a Connected Phone (Remote Receive)" on page 48
&
"Basic Settings Menu" on page 53
&

Making Settings Individually for Printer's Fax Features

You can configure the printer's fax features individually using the printer's control panel. The settings made using
Fax Setting Wizard can also be changed. For more details, see the descriptions of the Fax Settings Menu.
Related Information
"Menu Options for Fax Settings" on page 51
&

Setting Receive Mode

There are two options in Receive Mode for receiving incoming faxes. You can make settings in the menu below.
Settings > General Settings > Fax Settings > Basic Settings > Receive Mode
Receive Mode
Manual
Auto
Related Information
"Usage of Auto Mode" on page 47
&
"Usage of Manual Mode" on page 47
&
"Basic Settings Menu" on page 53
&
Fax Settings
Use of Phone Line
Mainly for phoning, but also for faxing
Only for faxing (external phone device is not required)
Mainly for faxing, and sometimes phoning
46