Sonar Alarms menu (left) with Adjust Zone command selected.
Adjust Zone Alarm selection box (right) with Upper selected.
3. To set the upper boundary for the Zone Alarm, use ← or→ to select
, then press ↑ or ↓ to move the top of the bar to the desired depth.
U
PPER
4. To set the lower boundary for the Zone Alarm, use ← or→ to select
, then press ↑ or ↓ to move the bottom of the bar to the desired
L
OWER
depth.
5. Press
EXIT
fish, bottom, structure — within the zone alarm's depth range will trig-
ger the zone alarm.
6. To turn off the alarm Press the
press
|
MENU
MENU
. Press ↓ to
ENT
To switch to a different depth setting, open the Sonar Alarms menu
and repeat the instructions in steps 3 and 4 above.
Fish Alarm
Use the fish alarm for a distinctive audible alarm when fish or other
suspended objects are detected by the Fish I.D.™ feature (Fish I.D.
must be turned on for the Fish Alarm to work). a different tone sounds
for each fish symbol size shown on the display.
|← to
Z
A
ONE
and use ↑ or ↓ to select Sonar Alarms, then press
Z
A
E
ONE
LARM
|
E
LARM
NABLED
key on the front of the unit or
A
LARM
|
|
ENT
EXIT
NABLED
52
|
. Now, any echo —
ENT
EXIT
.