Radar; Sonar Simulator - Lowrance X510C Operation Instructions Manual

Radar

When you access the Radar Page, the screen will switch to the radar dis-
play. Information on radar installation and radar operation are included
in two documents that come packed with Lowrance radar units: Radar
and RIM 100 Radar Interface Module Installation Instructions and Radar
Operation Instruction Manual. Refer to these documents for information
on your radar unit.
NOTE:
Before using your radar, make sure you have checked the Enable
Radar Port checkbox on the main menu.
To enable Radar Port:
1. From a sonar page, press
2. Highlight
E
the Enable Radar Port checkbox.
3. Repeat Step 2 to disable the radar port, which will uncheck the
checkbox. Press
To access Radar Page:
1. Press
PAGES
2. Press
MENU
dar display.
Radar Page (left) with Radar menu display (right).

Sonar Simulator

This unit has a built-in simulator that lets you run it as if you were on
the water. All sonar features and functions are useable. When in simu-
lator mode, you will see [Simulated] at the bottom of the display.
R P
NABLE ADAR ORT
to return to the sonar display.
EXIT
, highlight the
to open the Radar menu. Press
| to access the main menu.
MENU MENU
and press
tab and press
R
ADAR
81
, which will place an X in
ENT
.
ENT
to return to the ra-
EXIT