Advanced Options Menu; Instance; Restore Defaults - Lowrance X510C Operation Instructions Manual

5. Select your engine type and press
appear: Are you sure you wish to change this device's configuration?
6. Highlight
Y
main display.

Advanced Options menu

The Engine Interface Advanced Options menu contains three catego-
ries: Instance, Restore Defaults and Reset Trim Calibration.

Instance

The Instance command is intended for use only by experienced NMEA
2000 network technicians. Instance allows network technicians to re-
solve certain electronic probe conflicts. This is most likely to occur if the
network includes LMF-200 or LMF-400 digital gauges, which support
the display of fewer electronic probes than your sonar unit. If you want
to use your unit in a network including one of these digital gauges, you
may need to consult customer service. You should never need this
command if you are connecting your unit to a network with similar dis-
play units and/or a series of electronic probes.

Restore Defaults

The Restore Defaults command allows you to reset an individual en-
gine interface's settings to factory defaults. If, for example, you execute
the Restore Defaults command from your Port Engine Interface Ad-
vanced Options menu, only the settings for the Port Engine Interface
will be reset to factory defaults. Other engine interfaces on the network
will not be affected.
To restore default settings:
1. Press
MENU| MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
3. Use ↑ ↓ to select the desired fluid level and press
Configuration menu will appear.
4. Highlight
A
5. Select
R
ESTORE
appear: Are you sure you wish to change this device's configuration?
6. Highlight
Y
main display.
and press
ENT
ES
, use ↑ ↓ to select
and press
S
US ETUP
O
DVANCED PTIONS
and press
D
EFAULTS
and press
ENT
ES
. The following message will
ENT
. Press
EXIT
NMEA 2000
.
ENT
and press
ENT
. The following message will
ENT
. Press repeatedly to get back to the
EXIT
104
repeatedly to get back to the
and press
ENT
.
. The
ENT
. The Device