Ep-15 Fluid Level Configuration - Lowrance X510C Operation Instructions Manual

If, for example, you execute the Restore Defaults command from your
Port Fuel Flow Advanced Options menu, only the settings for the Port
Fuel Flow will be reset to factory defaults. Other fuel flows on the net-
work will not be affected.
To restore default settings:
1. Press
MENU| MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
ration menu. A list of network devices will be at the top of the page.
3. Use ↑ ↓ to select the desired fuel flow and press
Configuration menu will appear.
4. Highlight
A
5. Select
R
ESTORE
appear: Are you sure you wish to change this device's configuration?
6. Highlight
Y
main display.

EP-15 Fluid Level Configuration

To input Device Name:
1. Press
MENU| MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
ration menu. A list of network devices will be at the top of the page.
3. Select a fluid level you want to rename and press
Configuration menu will appear with the Device Name dialog box high-
lighted.
and use ↑ ↓, ← → to input the desired name for the fluid
4. Press
ENT
level. Press
ENTER
play.
To select Tank Instance (Location):
1. Press
MENU| MENU
NMEA 2000 menu will appear with five options: Bus Setup, Fuel Man-
agement, NMEA 2000 Alarms, Waypoint Sharing and Backlight Syn-
chronization.
2. Highlight
B
ration menu. A list of network devices will be at the top of the page.
, use ↑ ↓ to select
and press
S
US ETUP
O
DVANCED PTIONS
and press
D
EFAULTS
and press
ENT
ES
, use ↑ ↓ to select
and press
S
US ETUP
. Press
EXIT
, use ↑ ↓ to select
and press
S
US ETUP
NMEA 2000
, which will open the Bus Configu-
ENT
and press
ENT
. The following message will
ENT
. Press
EXIT
NMEA 2000
, which will open the Bus Configu-
ENT
repeatedly to get back to the main dis-
NMEA 2000
, which will open the Bus Configu-
ENT
100
and press
ENT
.
repeatedly to get back to the
and press
ENT
and press
. The
ENT
. The Device
. The
ENT
. The Device
. The
ENT