Sonar Alarms menu with Adjust Zone command selected (left).
Adjust Zone Alarm selection box with Upper selected (right).
3. To set the upper boundary for the Zone Alarm, use ← or→ to select
, then press ↑ or ↓ to move the top of the bar to the desired depth.
U
PPER
4. To set the lower boundary for the Zone Alarm, use ← or→ to select
, then press ↑ or ↓ to move the bottom of the bar to the desired
L
OWER
depth.
5. Press
|← to
EXIT
echo — fish, bottom, structure — within the zone alarm's depth range
will trigger the zone alarm.
6. To turn off the alarm, press
|
A
ENT
NAR
LARMS
To switch to a different depth setting, open the Sonar Alarms menu
and repeat the instructions in steps 3 and 4 above.
Fish Alarm
Use the fish alarm for a distinctive audible alarm when fish or other
suspended objects are detected by the Fish I.D.™ feature (Fish I.D.
must be turned on for the Fish Alarm to work). A different tone sounds
for each fish symbol size shown on the display.
Z
A
ONE
LARM
|↓ to
Z
A
ONE
LARM
|
|
E
ENT
NABLED
|
|↓ to
MENU
MENU
|
E
ENT
NABLED
60
|
|
EXIT
EXIT
EXIT
|
A
LARMS
|
|
|
EXIT
EXIT
EXIT
. Now, any
|↓ to
ENT
S
O-
.