Table of Contents
Advertisement
ASP is an effective tool in combating noise. In sonar terms, noise is any
undesired signal. It is caused by electrical and mechanical sources such
as bilge pumps, engine ignition systems and wiring, air bubbles passing
over the face of the transducer, even vibration from the engine. In all
cases, noise can produce unwanted marks on the display.
The ASP noise rejection feature is especially useful because it typically
lets you operate the boat at all speeds without adjusting the sensitivity
or other controls.
The ASP feature has three settings — Off, Low and High. When first
turned on, noise rejection is set on low. If you have high noise levels, try
using the high ASP setting. However, if you are having trouble with
noise, we suggest that you take steps to find the interference source
and fix it, rather than continually using the unit with the high ASP
setting.
There are times when you may want to turn ASP off. This allows you to
view all incoming echoes before they are processed by the ASP feature.
To change the ASP setting, press
appears. Use the up and down arrow keys to select the desired setting,
then press
PWR
ALARMS
The sonar unit has three different types of alarms: fish, shallow and
deep.
Fish Alarm
The Fish Alarm sounds a tone when a fish symbol appears on
the screen. The default setting is off, and the Fish I.D. feature
must be turned on for fish alarms to work.
To turn Fish I.D. on, press
appears. Press
press
until the
MENU
select
, then press
O
N
To turn off the fish alarm without turning off fish symbols, press
until
DOWN
F
ISH
press
to clear the menu. Repeat the above steps to turn the alarm
PWR
back on, but press
Depth Alarms
The depth alarms are triggered only by the bottom signal. No other
echoes will activate these alarms. The depth alarms consist of a shallow
and a deep alarm. The shallow alarm sounds an alarm tone when the
to clear the menu.
UP ARROW
F
A
ISH
LARM
.
PWR
appears. Press
A
LARM
to select
UP ARROW
MENU DOWN
until the
MENU
to select
, then press
O
N
menu appears. Press
DOWN ARROW
before clearing the menu.
O
N
35
until
N
R
OISE
menu
F
ID
ISH
. Then,
PWR
UP ARROW
MENU
to select
, then
O
FF
EJECT
to
Hide quick links:
Advertisement
Table of Contents
