Sonar With Custom Gauges - Lowrance X510C Operation Instructions Manual

Sonar with Custom Gauges

The Sonar with Custom Gauges page has a split screen with sonar on
the right side, digital gauge information on the left side. The two win-
dows can be resized to make one side bigger than the other or may be
set up to split the screen evenly.
Sonar with Custom Gauges selected on the Pages menu (left). To
change custom gauge information, access overlay data on the Custom
Gauges menu (center). Overlay Data shown menu (right).
To customize digital gauge display:
1. Press
PAGES
2. Press
MENU
shown menu will appear.
3. Highlight
(P
menu with three expandable data categories: Time, Sonar Data and
Sensor Data.
4. Highlight the desired data category and press
pand the list, revealing several subcategories with checkboxes next to
them.
5. Select the desired subcategory and press
checkmark in the checkbox, showing the selected data is set for display.
6. If you want to display other data types, repeat Steps 4 and 5. Press
repeatedly to get back to the Sonar with Custom Gauges page. The
EXIT
data you selected will now be displayed in the gray area on the left side
of the screen.
To change Overlay data size:
1. After overlay data has been added to the display, press
light
S
ONAR WITH
and press
D
LAY ATA
, highlight
S
ONAR WITH
, select
O
VERLAY
E
RESS NT TO ADD
C G
USTOM AUGES
. The Overlay Data Shown menu will appear.
ENT
C
USTOM
and press
D
ATA
and press
...) ENT
and press
ENT
79
and press
G
AUGES
. The Overlay Data
ENT
to open the Data Viewer
, which will ex-
ENT
, which will place a
ENT
. Press
MENU
.
ENT
, high-
PAGES
O
SELECT VER-