5. Remove the jammed staples, then push the clamp in the direction shown until the clamp clicks into the locked
position.
6. Grasp the staple cartridge handle, then insert the cartridge into the stapler until the cartridge clicks into
position.
7. Close the finisher front door.
S TA P L E J A M S I N T H E O F F I C E F I N I S H E R
Clearing Staple Jams in the Office Finisher
C C a a u u t t i i o o n n : :
Do not perform this procedure while the printer is printing.
Xerox
®
VersaLink
®
B71XX Series Multifunction Printer User Guide
Troubleshooting
237