Technical Data - GEM 1235 Operating Instructions Manual

7 Technical data

7 Technical data
7.1 Temperature
Ambient temperature:
Storage temperature:
7.2 Product compliance
EMC Directive:
SIL:
7.3 Mechanical data
Installation position:
Weight:
Protection class:
Travel sensor:
7.4 Electrical data
Supply voltage Uv:
Duty cycle:
Reverse battery protec-
tion:
Electrical protection
class:
Line fuse
Current consumption:
GEMÜ 1235
24V / IO-Link, 3E, 4E
-10 to 70 °C
0 — 40 °C
2014/30/EU
Product description:
Device type:
Valid software version:
Safety function:
HFT (Hardware Fault Tolerance):
MTTR (Mean Time To Restoration):
MTBF (Mean Time Between Failures):
Further information, see SIL safety manual
UL listed for Canada and USA
Certificate: E515574
Optional
Travel length code 030:
Travel length code 050:
Travel length code 075:
IP 67
Minimum stroke:
Maximum stroke:
Hysteresis:
Accuracy:
24 V DC (18 to 30 V DC)
Continuous duty
yes
III
630 mA medium time lag (not applicable for operation with IO-Link Master)
typically 30 mA
Electrical position indicator GEMÜ 1235
B
V1.0.0.4
The safety function is defined as a High (24 V DC) signal
at pin 5 (device version 3S/4S) and at pin 4 (device ver-
sion 3E/4E), if the current position of the integrated travel
sensor is smaller than the switch point CLOSED (default
setting 12 %).
0
24 hours
346 years
115 g
138 g
160 g
Travel sensor version Code
Code 030 Code 050
2.0 mm 3.5 mm
30.0 mm 50.0 mm
0.2 mm 0.4 mm
0.2% Full Scale
12 / 26
Code 075
5.0 mm
75.0 mm
0.5 mm
www.gemu-group.com