Technical Data - GEM 1240 Operating Instructions Manual

7 Technical data

7 Technical data
7.1 Temperature
Ambient temperature:
Storage temperature:
7.2 Product conformity
EMC Directive:
Low Voltage
Directive:
7.3 Mechanical data
Installation position:
Weight:
Protection class:
Travel sensor:
7.4 Electrical data
Electrical connection
type:
Switch type:
Supply voltage:
Current consumption:
GEMÜ 1240
0 — 60 °C
-10 — 70 °C
2014/30/EU
2014/35/EU
Optional
420 g
IP 67
5 — 75 mm
Connection thread: M16 x 1.5, WAF 19
Cable diameter: 4.5 to 10 mm
Recommended wire cross section: 0.75 mm² x 8 cables
Code M1
Microswitch, change-over con-
tact, SPDT
Code M1
24 V DC, 250 V AC
Code M1
for DC: 5 mA to 5 A
for AC: 100 mA to 6 A
Code N1
2-wire NAMUR
Switch
Code N1
8 V DC
Switch
Code N1
≥ 3 mA (undamped)
≤ 1 mA (damped)
8 / 18
Code P1
3-wire, normally open contact,
PNP
Code P1
10 to 30 V DC
Code P1
0–200 mA
www.gemu-group.com