Wiring Requirements - Delta R2-EC 004 Series User Manual

Wiring and Installation
(3) The installation is complete.
3

3.4.2 Wiring requirements

1. The recommended wire gauge for wiring with the housing connector or terminal block is
26 to 18 AWG.
2. The recommended length for exposed wire is 8 mm to 9 mm (0.31" to 0.35").
3. Pay attention to the following when wiring with wire ferrules.



3-8
Use a correct crimping tool (such as Dinkle DNT13-0101).
The recommended length for L1 is 8 mm to 10 mm (0.31" to 0.39").
The recommended diameter (D1) is 0.75 mm to 1.4 mm (0.03" to 0.06").
DIN
R2-ECx004 User Manual