Installing The Envelope Feeder - Lexmark Optra T522 Setup Manual

Installing the envelope feeder

Lexmark T522 label
(colored triangle)
Release latch
Envelope
feeder con-
nector door
Slots
The envelope feeder attaches to the front of your printer
behind the lower front door. It can be removed when you
are not using it, making the printer more compact.
Refer to the Lexmark T522 online information for details
about using the envelope feeder.
1
Push the release latch and open the printer lower
front door.
2
Lift open the envelope feeder connector door.
3
Align the tabs on the envelope feeder with the slots
on both sides of the printer, and then gently push
the envelope feeder into the opening until it snaps
into place.
The envelope feeder tilts downward at a slight angle
when it is installed properly.
9