Setting The Printer Ip Address; Step 6: Configure For Tcp/Ip - Lexmark Optra T522 Setup Manual

Step 6: Configure for TCP/IP

Setting the printer
IP address
If you have TCP/IP available on your network, we recom-
mend that you assign an IP address to the printer.
If your network is using DHCP, an address is automatically
assigned.
1
Look for the address under the TCP/IP heading on
the network setup page you printed in "Printing a
network setup page" on page 21.
2
Go to "Verifying the IP settings" on page 24 and
begin with step 2.
Note: You can find instructions for other methods of set-
ting the IP address in the online documentation on
the drivers CD that shipped with your printer.
If your network is not using DHCP, then you must manually
assign an IP address. One of the easiest ways is to use
the operator panel:
1
Press Menu until you see Network Menu, and then
press Select.
2
Press Menu until you see Standard Network, and
then press Select.
Standard Network appears if you purchased a
printer with an on-board network port. If you have an
optional MarkNet card installed in Slot 1, you see
Network Option 1. If the card is installed in Slot 2,
you see Network Option 2.
3
Press Menu until you see Std Net Setup, and then
press Select.
4
Press Menu until you see TCP/IP, and then press
Select.
5
Press Menu until you see Set IP Address, and then
press Select.
23