Installing A High-Capacity Output Stacker; Installing The Envelope Feeder - Lexmark Optra Optra T Setup Manual

Installing a High-Capacity

Installing the Envelope Feeder

Optra T label
(colored triangle)
Release latch
14 Install Paper Options and Printer
Output Stacker
Optra T label
(colored triangle)
Envelope feeder
connector door
Slots
Optra T printer models T616(n), T614(n) and
T612(n) support one high-capacity output stacker.
The high-capacity output stacker is packaged with
installation instructions.
The envelope feeder attaches to the front of your
printer behind the lower front door. It can be
removed when you are not using it, making the
printer more compact.
Refer to the User's Guide, available on the Optra T
Publications CD, for information on using the enve-
lope feeder.
1
Push the release latch and open the lower
front door of the printer.
2
Lift open the envelope feeder connector
door.
3
Align the tabs on the envelope feeder with
the slots on both sides of the printer and
gently push the envelope feeder into the
opening until it snaps into place.
The envelope feeder tilts downward at a
slight angle when it is installed properly.