Installing A Duplex Unit - Lexmark Optra T522 Setup Manual

Installing a duplex unit

Back cover
Lexmark T522 label
(colored triangle)
Tab
The duplex unit attaches under the printer, below the stan-
dard input tray and above any paper drawers.
Refer to the Lexmark T522 online information, on the Lex-
mark T522 Publications CD, for details about using the
duplex unit.
500 Sheet Duplex
Square
hole
Round
peg
1
Place the duplex unit on top of any installed paper
drawers, or the table or printer cabinet where you
plan to use the printer.
The tab, round peg, and square holes on top of any
drawer help you seat the duplex unit so the edges
are aligned properly. Make sure it is securely in
place.
2
Attach the printer. See "Setting up the printer" on
page 6.
5