Installing The Envelope Feeder - Lexmark T620 Setup Manual

Installing the envelope feeder

Lexmark T Family
label
Release latch
16
Envelope feeder
connector door
Slots
The envelope feeder attaches to the front of your
printer behind the lower front door. It can be
removed when you are not using it, making the
printer more compact.
Refer to the Lexmark T620/T622 Publications CD
for details about using the envelope feeder.
1
Push the release latch and open the printer
lower front door.
2
Lift open the envelope feeder connector
door.
3
Align the tabs on the envelope feeder with
the slots on both sides of the printer, and
then gently push the envelope feeder into
the opening until it snaps into place.
The envelope feeder tilts downward at a
slight angle when it is installed properly.