Table of Contents
Advertisement
10.5.5 Configuration of alteration detection
1.
Select "On" for "Additional info for detecting alteration", and click the [Set] button.
2.
Extensive information for alteration detection will be added to video files (MP4 format) recorded after
changing the setting.
IMPORTANT
•
When the "Additional info for detecting alteration" setting is changed, manual recording on the SD
memory card will stop. Start manual saving again as necessary.
Note
•
Alteration detection can be performed on video files (MP4 format) recorded when "On" is selected for
"Additional info for detecting alteration" using exclusive software.
For further information about exclusive software and how to use it, refer to our website below.
https://i-pro.com/global/en/surveillance/training-support/support/technical-information
10 Configure the basic settings of the camera [Basic]
Operating Instructions
67
Advertisement
Table of Contents
