Table of Contents
Advertisement
2 Monitor images on a cellular phone/mobile terminal
2 Monitor images on a cellular phone/mobile
terminal
2.1 Monitor images on a cellular phone
It is possible to connect to the camera using a cellular phone via the Internet and monitor images (JPEG only)
from the camera on the screen of the cellular phone.
IMPORTANT
•
When the authentication window is displayed, enter the user name and password.
To enhance the security, it is recommended to change the password periodically. (®page 125)
•
If the cellular phone in use is not compatible with UTF-8 encode, it is impossible to display the screen
correctly.
•
When "VGA", "QVGA", "640x360", or "320x180" is not selected one time or more for either one of
"JPEG(1)", "JPEG(2)", or "JPEG(3)" of [JPEG] on the [JPEG/H.264] tab, images cannot be viewed from
cellular phones.
Note
•
It is necessary to configure the network settings of the cellular phone in advance to connect to the
Internet and monitor images from the camera. (®page 130)
•
When "Auto" is selected for "Language", the screen is displayed in English. If you want the screen to
be displayed in Japanese or Chinese, select "Japanese" or "Chinese" for "Language". (®page 44)
1.
Access to "http://IP address/mobile"
cellular phone.
→
Images from the camera will be displayed.
Refresh control
Press the dial key "5" or the [Manual Refresh] button to refresh the camera images.
Press the [Auto Refresh] button to refresh the images from the camera in 5-second intervals.
When the dial key "5" or the [Manual Refresh] button is pressed again, the refresh mode of the camera
will return to manual refresh.
18
Operating Instructions
or "http://Host name registered in the DDNS server/mobile" using a
*1
WV-SFV130
①
②
③
Advertisement
Table of Contents
