Table of Contents
Advertisement
[Alarm deactivation time]
Configure the duration that detections won't be made after an alarm is detected. For example, by using this
function you can prevent E-mail from being sent too often when E-mail notifications are configured to be sent
to cellular phones when an alarm is detected.
5s/ 10s/ 30s/ 1min/ 3min/ 5min/ 10min
Default: 5s
Note
•
The duration that alarm detections are not made can be managed for each type of alarm. For example,
during the time when detections for command alarms are not made, detections for VMD alarm can be
made.
13.2 Configure the settings relating to the camera
action on alarm occurrence [Alarm]
Click the [Alarm] tab on the "Alarm" page. (®page 38, page 40)
The settings related to the camera action on alarm can be configured in this section.
•
[Image compression rate upon alarm detection]
Click "Image compression rate upon alarm detection >>" to display the setup menu that can configure the
settings relating to image quality when an alarm occurs. The setup menu will be displayed in a newly
opened window. (®page 106)
•
[Alarm E-mail notification]
Click "E-mail server >>" to display the setup menu that can configure the settings relating to E-mail
notification when an alarm occurs. The setup menu will be displayed in a newly opened window.
(®page 107)
•
[Alarm image FTP transmission]
Click "FTP >>" to display the setup menu that can configure the settings relating to FTP transmission when
an alarm occurs. The setup menu will be displayed in a newly opened window. (®page 108)
•
[Alarm image recording(SD memory card)]
Click "SD memory card >>" to display the setup menu that can configure the settings relating to recording
images on an SD memory card when an alarm occurs. The setup menu will be displayed in a newly opened
window. (®page 109)
•
[TCP alarm notification]
Click "TCP alarm notification >>" to display the setup menu that can configure the settings relating to
transmitting TCP alarm notification when an alarm occurs. The setup menu will be displayed in a newly
opened window. (®page 110)
•
[HTTP alarm notification]
Click "HTTP alarm notification >>" to display the setup menu that can configure the settings relating to
transmitting HTTP alarm notifications when an alarm occurs. The setup menu will be displayed in a newly
opened window. (®page 111)
13 Configure the alarm settings [Alarm]
Operating Instructions
105
Advertisement
Table of Contents
