Configuration Of Alteration Detection - Panasonic WV-S2500 Series Operating Instructions Manual

•
When the [Confirm] button is clicked, the registered information of the installed certificate (CA
certificate) will be displayed in the "CA Certificate - Confirm" dialog box. (Only "Organizational
Unit" will be displayed with an asterisk (*).)
•
When the [Delete] button is clicked, the installed certificate (CA certificate) will be deleted.
•
When "On" is selected for "Additional info for detecting alteration", it is impossible to delete the
certificate (CA certificate) issued by CA.
•
To change (or update) the certificate issued by CA, perform step 1 and 2.
IMPORTANT
•
Before deleting the valid certificate (CA certificate), confirm that there is a backup file of the certificate
(CA certificate) on the PC or another media. The backup file will be required when installing the
certificate (CA certificate) again.
•
The expiration date of the certificate issued by CA can be checked by double-clicking the server
certification file issued by CA.

2.4.4.4 Configuration of alteration detection

1.
Select "On" for "Additional info for detecting alteration", and click the [Set] button.
2.
Extensive information for alteration detection will be added to video files (MP4 format) recorded after
changing the setting.
IMPORTANT
•
When the "Additional info for detecting alteration" setting is changed, manual recording on the SD
memory card will stop. Start manual saving again as necessary.
Note
•
Alteration detection can be performed on video files (MP4 format) recorded when "On" is selected for
"Additional info for detecting alteration" using exclusive software.
For further information about exclusive software and how to use it, refer to our website below.
http://security.panasonic.com/support/info/
2 Settings
Operating Instructions 81