Configure Network Printers; Printer Does Not Appear In The List Of Printers Found On The Network; Check The Ethernet Cable; Make Sure The Power Is On - Lexmark X5410 User Manual

5
Make sure:
•
The port is set to a USB port.
•
File is not set as the port.

Configure network printers

Configure
To configure a network printer, select a printer from the list in the window. Click Configure to assign the printer an
Internet Protocol (IP) address. Contact your system support person for more information.
Add printers
Specify remote subnets that may have direct network attached printers. If the software detects a direct network
attached printer, you must first highlight the printer in the window, and then click Configure to manually assign an
IP address to the printer. Contact your system support person for more information.
Note: The software does not automatically configure printers found on remote subnets.
Refresh
Click Refresh to have the Configuration Utility automatically search to find and configure newly added printers.
Printer does not appear in the list of printers found
on the network
You must have an external print server (purchased separately) to connect the printer to your network.
C E
HECK THE THERNET CABLE
•
Check the Ethernet cable and the Ethernet connectors at both ends for any obvious damage.
•
Firmly plug one end of the Ethernet cable into the print server. Firmly plug the other end of the Ethernet cable
into the network hub or wall connection.
•
Try using a different cable. Damage to the cable may not be obvious.
M
AKE SURE THE POWER IS ON
•
Make sure the printer is connected to a power source and is turned on.
•
Make sure the print server is connected to a power source and is turned on.
M
AKE SURE THAT THE NETWORK IS OPERATING PROPERLY
•
Try to access other computers on the network.
•
Make sure all switches, hubs, and other connecting devices are turned on.
General networking
35