Paper Continues To Jam; Copy Troubleshooting; Copier Does Not Respond; Scanner Unit Does Not Close - Lexmark X5410 User Manual

R
EVIEW BANNER PRINTING CHECKLIST
•
Use only the number of sheets needed for the banner.
•
Select the following settings to enable the printer to feed paper continuously without jamming:
1
With a document open, click File
2
Click Properties, Preferences, Options, or Setup.
3
Select the Paper Setup tab.
4
From the Paper Size area, select Banner.
5
Select Letter Banner or A4 Banner as the paper size.
6
Select Portrait or Landscape.
7
Click OK.
8
Click OK or Print.

Paper continues to jam

A
RE YOU USING PAPER DESIGNED FOR AN INKJET PRINTER
Check the type of paper you are using. Some low-quality papers may be too thin or too slick to be fed correctly
into the printer. For more information, see "Choosing compatible specialty paper types" on page 48.
A
RE YOU LOADING THE PAPER CORRECTLY
For more information, see "Loading paper" on page 37.
Note: Do not force paper into the printer.

Copy troubleshooting

Copier does not respond

These are possible solutions. Try one or more of the following:
C
HECK MESSAGES
Resolve all error messages.
C
HECK POWER
If the light is not on, make sure the printer is plugged into a properly grounded outlet. Make sure the power
cord is properly connected to the printer.

Scanner unit does not close

1
Lift the scanner unit.
2
Remove any obstruction keeping the scanner unit open.
3
Lower the scanner unit.
Print.
?
Troubleshooting
114
?