Checking The Printer Status; Checking Printer Readiness - Lexmark X5410 User Manual

Checking the printer status

Windows Vista users only
1
Click Control Panel
2
Make sure:
•
The printer icon does not say Paused. If the printer is paused, right-click the icon, and then click Resume
Printing.
•
The printer icon says Ready. If it says Offline, right-click the icon, and then click Use Printer Online.
•
The printer icon has a check mark indicating that the printer is set as the default printer. If it is not, right-click
the icon, and then click Set as Default.
Windows XP users only
1
Click Start Settings
2
Make sure:
•
The printer icon does not say Paused. If the printer is paused, right-click the icon, and then click Resume
Printing.
•
The printer icon says Ready. If it says Offline, right-click the icon, and then click Use Printer Online.
•
The printer icon has a check mark indicating that the printer is set as the default printer. If it is not, right-click
the icon, and then click Set as Default.
Windows 2000 users only
1
Click Start Settings
2
Right-click the Lexmark X5400 Series icon.
3
Make sure:
•
Set as Default Printer is selected.
•
Pause Printing is not selected.
•
Use Printer Offline is not selected.

Checking printer readiness

The printer may not be ready to print. Check the following. When you think you have solved the problem, test the
solution by sending a document to print.
D
OES THE PRINTER HAVE PAPER
For more information, see the related topic below.
A
RE THE STICKER AND TAPE REMOVED FROM THE PRINT CARTRIDGES
1
Lift the scanner unit.
2
Remove the print cartridges from the print cartridge carrier.
3
Make sure the sticker and tape are removed from the bottom and back of the cartridges.
Printer.
Printers and Faxes.
Printers.
,
AND IS IT PROPERLY LOADED
Troubleshooting
?
101
?