Troubleshooting; Before You Troubleshoot; Using The Service Center To Solve Printer Problems; If Troubleshooting Does Not Solve Your Problem - Lexmark S815 User Manual

Troubleshooting

Before you troubleshoot

Use this checklist to solve most printer problems:
•
Make sure the power cord is plugged into the printer and into a properly grounded electrical outlet.
•
Make sure the printer is turned on.
•
Make sure the printer is securely connected to the host computer, print server, or other network access point.
•
Check the printer for error messages, and resolve any errors.
•
Check for paper jam messages, and clear any jams.
•
Check the ink cartridges, and install new cartridges if necessary.
•
Turn the printer off, wait about 10 seconds, and then turn the printer back on.
Note: Make sure the printer is not in Power Saver mode. Press and hold
•
Use the Service Center to locate and solve the problem (Windows only).

Using the Service Center to solve printer problems

The Service Center provides step-by-step troubleshooting help and contains links to printer maintenance tasks and
customer support.
To open the Service Center, use one of these methods:
Method 1
If it appears on an error message dialog, then click the For
additional assistance, use the Service Center link.

If Troubleshooting does not solve your problem

Visit our Web site at http://support.lexmark.com to find the following:
•
Knowledgebase articles with the latest information and troubleshooting for your printer
•
Live online technical support
•
Contact numbers for telephone technical support

Setup troubleshooting

•
"Incorrect language appears on the display" on page 129
•
"Printhead errors" on page 129
•
"Software did not install" on page 130
Method 2
1
Click or Start.
2
Click All Programs or Programs, and then select the
printer program folder from the list.
3
Navigate to:
Printer Home > Support tab > Service Center
Troubleshooting
128
for three seconds to turn off the printer.