The Continue Button Is Unavailable - Lexmark S815 User Manual

3
In the Wireless settings section, look for the SSID.
4
Write down the SSID, security type, and the WEP key/WPA passphrase (if shown).
Notes:
•
Make sure you copy the network information down exactly, including any capital letters.
•
Store the SSID and the WEP key or WPA passphrase in a safe place for future reference.
M OS
AKE SURE YOUR
The printer supports wireless printing only through AirPort base stations for Mac OS X version 10.5 or later.

The Continue button is unavailable

Try the following solutions in the order they appear until the Continue button becomes active and can be clicked:
C USB
HECK IF THE
COMPUTER AND THE PRINTER
USB ports are marked with
M
AKE SURE THAT THE PRINTER IS PLUGGED IN AND TURNED ON
Check to see if the button is lit. If you have just turned on the printer, then you might need to disconnect the
USB cable and reconnect it.
M
AKE SURE THAT THE
Test the USB port by connecting other devices to it. If you can successfully use other devices from the port, then
the port is working.
If the USB port on the computer is not working, then try using the other USB ports on the computer.
M
AKE SURE THAT THE
Try using a different USB cable. If you are using a cable longer than 10 feet, then try using a shorter cable.
M
AKE SURE THAT YOU ARE USING THE CORRECT
Compare the printer model on the CD to the printer model on the printer. The numbers should either match exactly
or be within the same series.
If you have any doubts, look for an updated version of the printer software on our Web site. For more information,
see "Installing the printer software" in the User's Guide.
IS COMPATIBLE WITH WIRELESS PRINTING THROUGH
CABLE IS SECURELY PLUGGED INTO THE
.
USB
PORT ON THE COMPUTER IS WORKING
USB
CABLE IS WORKING
Troubleshooting
USB
CD
FOR YOUR PRINTER MODEL
158
A P
IR ORT
PORTS ON BOTH THE