Troubleshooting; Forms Merge - Lexmark MX-B468F User Manual

Use printer menus
Network
Menu item
Network Setup Page
Wi‑Fi Direct Connected Clients

Troubleshooting

Menu item
Print Quality Test Pages
Cleaning the Scanner

Forms Merge

Note: This menu appears only when a hard disk or an intelligent storage drive is installed.
Menu item
Merge Mode
Print*
Data Capture
Disabled
Data Capture Target
Flash*
Print Port and Filter Settings
Network Port
On*
Off
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Print a page that shows the configured network and wireless settings on the
printer.
Note: This menu item appears only in network printers or printers connected
to print servers.
Print a page that shows the list of devices that are connected to the printer using
Wi‑Fi Direct.
Note: This menu item appears only when Enable Wi‑Fi Direct is set to On.
Description
Print sample pages to identify and correct print quality defects.
Print instructions on how to clean the scanner.
Description
Specify the mode of operation for Forms Merge.
Set the target destination where the captured data is forwarded.
Note: This menu item appears only when Merge Mode is set to Data Capture.
Enable Forms Merge to process all data that are sent to the network port.
175