Zone 2 & Record Zone Volume Control; To Use The Front Panel Volume Knob To Adjust Zone 2 Volume Level; To Use The Front Panel Volume Knob To Adjust Record Zone Volume Level - Lexicon MC-12 Release Note

MC-12
ZONE 2 & RECORD ZONE VOLUME CONTROL
@@@
v2.0
The front panel volume knob can now be used to adjust Main
Zone, Zone 2, and Record Zone volume levels.
To use the front panel volume knob to
adjust Main Zone volume level, follow the
same procedure as in previous software
releases. Rotate the volume knob clockwise to increase or
counterclockwise to decrease volume level. The horizontal bar
graph shown at the right will appear on the on-screen and front
panel displays. This graph illustrates the position at which the
current Main Zone volume level falls within the entire volume
range.
As in previous software releases, it is not required to press and hold
front panel buttons to use the volume knob to adjust Main Zone
volume level. The MC-12 automatically adjusts Main Zone volume
level when no front panel buttons are pressed and held while the
volume knob is rotated.
To use the front panel volume knob to adjust Zone 2 volume
level:
1. Press and hold the front panel Zone 2 input selection button
that corresponds with the current input source.
2. While pressing and holding the selected
button, rotate the volume knob clockwise
to increase or counterclockwise to
decrease volume level. The horizontal bar graph shown at the
right will appear on the on-screen and front panel displays.
This graph illustrates the position at which the current Zone 2
volume level falls within the entire volume range.
3. Release the selected front panel Zone 2 input selection button
To use the front panel volume knob to adjust Record Zone
volume level:
VOLUME -34dB
1. Press and hold the front panel Record Zone input selection
2. While pressing and holding the selected
3. Release the selected front panel Record Zone input selection
ZONE2 VOLUME -34dB
Software Version 2.0 Release & Errata Notes
when Zone 2 volume level has been set.
button that corresponds with the current input source.
button, rotate the volume knob clockwise
to increase or counterclockwise to
decrease volume level. The horizontal bar graph shown at the
right will appear on the on-screen and front panel displays.
This graph illustrates the position at which the current Record
Zone volume level falls within the entire volume range.
button when Record Zone volume level has been set.
Note:
When the front panel volume knob is rotated, the
MC-12 will adjust Main Zone volume level when:
1. A front panel Main Zone input selection button is
pressed and held.
2. No front panel Zone 2 or Record Zone input
selection buttons are pressed and held.
3. A remote control input selection button is pressed
and held. (Remote control input selection buttons
cannot be used to select Zone 2 or Record Zone
volume level adjustment, even when the ZONE
or REC command bank is active.)
RECORD VOLUME -34dB
5