Documentation Conventions; Caution - Lexicon MC-12 Release Note

DOCUMENTATION CONVENTIONS

This document is a supplement to the MC-12 User Guide (Rev 1). It contains release notes that provide information about the new and
enhanced features of Software Version 2.0. It also includes release notes for Software Version 1.1 and errata notes for the MC-12 User
Guide (Rev 1). Refer to the user guide for general safety, installation, and operating instructions.
This document uses the term "MC-12" to refer to the MC-12 Digital Controller and the MC-12 Balanced Digital Controller
unless otherwise specified.
The following symbols are used in this document:
Calls attention to a procedure, practice, condition or the like that, if not correctly performed or adhered to, could result

CAUTION

in damage or destruction to part or all of the product.
Note:
Calls attention to information that is essential to highlight.
Calls attention to features that were introduced or modified in Software Version 1.1.
v1.1
v2.0
Calls attention to features that were introduced or modified in Software Version 2.0.
SETUP INPUTS DVD1
Represents a menu path. Select the menu items identified in grey boxes to reach the menu or parameter identified
in the black box. In the example shown above, the SETUP option, INPUTS option, DVD1 input, and NAME parameter
must be selected to reach the INPUT NAME menu.
The DVD1 input and the DVD1 INPUT SETUP menu are used as examples throughout this document. Whenever the
DVD1 input appears as a selection in a menu path, any other input may be substituted. Likewise, whenever the DVD1
INPUT SETUP menu is shown in a figure, any other INPUT SETUP menu may be substituted.
NAME DVD1 INPUT NAME