Revised Input Setup Menus; A • Zone2 In Or Record In - Lexicon MC-12 Release Note

MC-12
MAIN MENU SETUP
MODE ADJUST INPUTS
AUDIO CONTROLS SPEAKERS
SETUP REAR PANEL CONFIG
DISPLAYS
VOLUME CONTROLS
TRIGGERS
LOCK OPTIONS

REVISED INPUT SETUP MENUS

@@@
v1.1
SETUP INPUTS DVD1
The parameters described in this section have been added to the
INPUT SETUP menus. These new parameters are marked with
@@@on the DVD1 INPUT SETUP menu shown above.
v1.1
5.1a
SETUP INPUTS DVD1
Accesses the 5.1a MODE menu shown at
the right, which can be used to select a
preferred listening mode for 5.1-channel
analog input sources. Descriptions of the
new 5.1-channel analog listening modes
begin on page 20.
INPUT SETUP
DVD1
DVD2
LD
TV
SAT
VCR
CD
PVR
GAME
v1.1
TAPE
TUNER
AUX
v1.1
DVD1 INPUT SETUP
5.1a 5.1a MODE
DVD1 5.1a MODE
5.1a(%)FILM OFF
5.1a(%)MUSIC OFF
5.1a%@%SurEX OFF
5.1a STANDARD
5.1a 2-CHANNEL
USE LAST
Software Version 2.0 Release & Errata Notes
The DVD1 input and the DVD1 INPUT SETUP menu are used as
DVD1 INPUT SETUP
examples throughout this document. Whenever the DVD1 input
NAME DVD1
appears as a selection in a menu path, any other input may be
DIGITAL IN COAX-1
substituted. Likewise, whenever the DVD1 INPUT SETUP menu
ANALOG IN NONE
ANLG IN LVL AUTO is shown in a figure, any other INPUT SETUP menu may be
VIDEO IN S-VIDEO-1
substituted.
COMPONENT IN 1
2-CH FILM
(**)D 5.1&&FILM
FILM
V
5.1a 5.1a(%)FILM
MAIN ADVANCED
V
ZONE2 IN DIGITAL
V
RECORD IN DIGITAL
RECORD ADVANCED
ZONE2 IN or RECORD IN
SETUP INPUTS
Control the interaction of the audio input connectors assigned to
the selected Zone 2 or Record Zone input. Each INPUT SETUP
menu allows the assignment of two audio input connectors, one
analog (ANALOG IN) and one digital (DIGITAL IN).
The ZONE2 IN parameter replaces the ZONE2 ADV menu INPUT
SELECT parameter. The ZONE2 ADV menu is no longer available.
The RECORD IN parameter replaces the RECORD ADV menu INPUT
SELECT parameter. The RECORD ADV menu is still available.
The table shown on the next page describes ZONE2 IN and
RECORD IN parameter settings.
(ANLG, DIGITAL, DMIX)
DVD1 ZONE2 IN or RECORD IN
. . . ZONE2 IN or RECORD IN continues on page 12
11