Dts(-Es) Status; Analog Status - Lexicon MC-12 Release Note

MC-12

dts(-ES) STATUS

@@@
v1.1
• Available when the remote control SHIFT-STAT command is
executed and a 6.1-channel dts(-ES) input source is present, or
when a 5.1-channel dts(-ES) input source is present and the ES
DECODING parameter is set to ON for the selected listening
mode.
• Features L, C, R, SL, SR, SB, and LFE level meters. The SB level
meter will appear under the conditions described in the Status
Menu Level Meters section on page 23.
Parameter Values
INPUT The name of the selected input
MODE The name of the selected listening mode
CHANNELS 3/3.1, 3/2.1
BIT RATE 754.5 to 1509.7kbps
ES ENCODING DISCRETE, MATRIX, NONE
WORD LENGTH 16bits, 20bits, 24bits
SAMPLE RATE 44.1kHz, 48kHz, 88.2kHz, 96kHz
STATUS menu parameter descriptions begin on page 28 of this
document and on page 5-20 of the MC-12 User Guide (Rev 1).
Software Version 2.0 Release & Errata Notes

5.1 ANALOG STATUS

• Available when the remote control SHIFT-STAT command is
executed and all of the following conditions are met:
- A 5.1-channel analog input source is present.
- The REAR PANEL CONFIG menu 5 STEREO & 5.1 ANLG
option is selected.
- The INPUT SETUP menu ANALOG IN parameter is set to
5.1 ANALOG.
- The MAIN ADV menu INPUT SELECT parameter is set to
AUTO or ANALOG. When set to AUTO, digital input
sources cannot be present.
- The MAIN ADV menu ANALOG BYPASS parameter is set to
OFF.
Parameter Values
INPUT The name of the selected input
MODE The name of the selected listening mode
INPUT TYPE ANLG
SAMPLE RATE 96kHz
STATUS menu parameter descriptions begin on page 28 of this
document and on page 5-20 of the MC-12 User Guide (Rev 1).
25