Remote Only; Program Operation Parameters; New Listening Modes - Lexicon MC-12 Release Note

Software Version 2.0 Release & Errata Notes
TRIGGER SETUP Menu
(continued from page 13)

REMOTE ONLY

SETUP TRIGGERS TRIGGER 1 or 2
Configures the selected TRIGGER OUTPUT connector for remote
operation. When set to ON, the selected connector is configured
for remote operation. It can be activated and deactivated with the
remote control commands described on page 8. The MC-12
ignores all other TRIGGER 1 and 2 SETUP menu parameter settings.
Program operation parameters set to ON are not associated with
the selected connector.
When set to OFF, the selected TRIGGER OUTPUT connector is not
configured for remote operation, and can be configured for
program operation.
Note:
The TRIGGER OUPUT connectors are deactivated
when the MC-12 is placed into standby. However,
when configured for remote operation, the connectors
are not automatically activated when the MC-12 is
powered on. Instead, the connectors must be
activated with the remote control commands
described on page 8.

PROGRAM OPERATION PARAMETERS

SETUP TRIGGERS TRIGGER 1 or 2
Configure the selected TRIGGER OUTPUT connector for program
operation. With the exception of the REMOTE ONLY parameter, all
TRIGGER 1 and 2 SETUP menu parameters are program operation
14
(ON, OFF)
REMOTE ONLY
(ON, OFF)
Parameter
parameters. The REMOTE ONLY parameter must be set to OFF to
configure the connector for program operation.
When the REMOTE ONLY parameter is set to OFF, the selected
connector can be associated with Main Zone inputs and listening
modes, Zone 2 input selection, and Record Zone input selection.
(Connectors cannot be associated with individual Zone 2 or Record
Zone inputs.) When the associated TRIGGER 1 or 2 SETUP menu
input or listening mode parameter is set to ON, the selected
connector is activated when the input or listening mode is
selected and deactivated when the input or listening mode is
deselected. When set to OFF, the selected connector is not
configured for program operation.

NEW LISTENING MODES

New listening modes are available for 2-channel and 5.1-channel
analog input sources. The 5.1-channel analog listening modes are
not available when the REAR PANEL CONFIG menu 8 STEREO
INPUTS option is selected. These listening modes require the REAR
PANEL CONFIG menu 5 STEREO & 5.1 ANLG option to be selected
so the 5.1-channel analog input connector can be used with A/D
conversion and internal processing.
Selecting the MAIN MENU MODE ADJUST option accesses the
MODE ADJUST menu shown on the next page, which indicates
listening modes that have been added or modified since Software
Version 1.0. The DOLBY Pro Logic listening modes have been
renamed, and the DOLBY DIGITAL listening mode now includes EX
decoding. The 5.1 BYPASS listening mode is now called 5.1a
BYPASS.
Descriptions of these new listening modes begin on the next page.
Other listening mode descriptions begin on page 5-2 of the MC-12
Lexicon