Canon OMNERA 500A Operator's Manual page 97

Fig. 3-59 Up/down
Fig. 3-60 Pendulum mode
Fig. 3-61 Tilting
Note!
Armrest has to be removed to allow tilt movement.
3.9.1.2 Light Indication (A)
The selected Workstation is indicated in the imaging system and with a green light on the
wallstand.
Operator´s Manual
Up/down
• Button G, Motorized
Overhead tube crane tracking wallstand
detector when auto-position active
• Button E, Manual
Pendulum mode wallstand
• Button F
The overhead tube crane performs a
pendulum movement in order to find
correct angulation of the central X-ray
Tilting -20° to 90°
• Button H, Motorized Tilt
Overhead tube crane tracking wallstand
detector when auto-position active
• Button E, Manual
1000-095-071-EN Rev. 2.1
Page 89
User Interface
Wallstand Control Elements
OMNERA 500A