Table of Contents
Advertisement
User Interface
Remote Control (option)
Indication diode
The diode shows a green light, when the remote control button is activated. When the diode
turns red, the batteries shall be exchanged.
Tube up
When the Tube up button is activated, the overhead tube crane moves upward. The
movement stops when the button is released or when the highest possible position is
reached.
Switch On/Off collimator light
The button turns the X-ray field illumination and linear light localizer on/off.
Automatic switch-off via a time switch.
On/Off switch
There is an On/Off switch for the remote control at the back of the remote control. When the
control is switched off, all buttons are disabled.
Battery changing slot
When the indication diode lights red, changing of battery is needed.
The remote control uses 2 LR03, 1.5V, AAA batteries. To change batteries, loosen the 3
screws and open the slot at the back of the remote control.
Note!
The batteries shall be recycled.
OMNERA 500A
1000-095-071-EN Rev. 2.1
Page 78
Operator´s Manual
Advertisement
Table of Contents
