Canon OMNERA 500A Operator's Manual page 63

3.3.4.1 User Settings – Display
It is possible to select which patient information to show on the display. The following
parameters can be selected:
• DoB; Date of Birth, where the following
formats are selectable:
– YYYY-MM-DD
– DD-MM-YYYY
– MM-DD-YYYY
DISPLAY SETTINGS
Patient Info Always on
Unit DoB ID
ID
Age
Sex
Acc.No.
Fig. 3-17 Selection of Always on/off
Jane Doe
Hand AP
Fig. 3-18 Always on selected
i
Abdomen Suspine
Fig. 3-19 Always on not selected.
The Patient info closes automatically or by pushing the black field with the
Operator´s Manual
DISPLAY
SETTINGS
Patient Info
Always on
Unit DoB ID
ID
Age
Sex
Unit cm
Acc.No.
Examination
On
Fig. 3-16 Tab DISPLAY — Patient info
THEMES
YYYY-MM-DD
Unit
DoB 1977-03-06 Age 43 Sex F
ID 987-65-4320 Acc No 987-65-4320
1000-095-071-EN Rev. 2.1
Page 55
User Interface
Display User Interface
THEMES
YYYY-MM-DD
cm
• ID; the identity of the patient
• Age; the age of the patient
• Sex: the sex of the patient
• Acc.No; Accession number
• Examination — On; Examination/Active
Protocol
The first line in USER SETTINGS menu, tab
DISPLAY, refers to the selection if Patient
information shall be shown (Always on) or
not on the OTC display.
When Always on is marked, patient
information is shown as soon as the patient
is selected.
When Always on is not marked, the
Patient info is shown when pushing the
black field with the
again.
OMNERA 500A