Table of Contents
Advertisement
Error Handling
Fault Handling
Jane Doe
Hand AP
X
SID
50
kV
AEC
Fault message: Checksum error
Fig. 5-3 Error information bar, table
5.1.1.2 Warning and Information
Jane Doe
Hand AP
SID
50
kV
AEC
Fault message: Movement stopped, Button
Fig. 5-4 Warning information bar
Fig. 5-5 Pop-up window — Warning information
bar
Fig. 5-6 Close button
5.1.1.3 Log
The Log file is part of the Setting menu and reached by pressing the gear or the Error/
Warning messenger bars.
OMNERA 500A
DoB 1977-03-06
Age 36 Sex F
ID 987-65-4320
Acc No 987-65-4320
60
60
110
cm
250
20
8
1
5
mA
ms
mAs
Density
post mAs
DoB 1977-03-06
Age 36 Sex F
ID 987-65-4320
Acc No 987-65-4320
60
60
110
cm
250
20
8
1
5
mA
ms
mAs
Density
post mAs
WARNING TITLE
2021-03-01 13:41:02
Description of Warning
Corrective Action
ADVANCED
Technical description of warning.
Node:
0xXXXX
Reason: 0xXXXX
Component: 0xXXXX
Extra:
0xXXXX
1 / 2
1000-095-071-EN Rev. 2.1
When closing the Error pop-up window,
shown in Fig. 5-1, an information bar
appears, see Fig. 5-3.
When the user pushes the information bar,
the Error pop-up window appears again.
The Error information bar (lower part of the
window) is present until the error is fixed or
the System is restarted.
A warning message appears in an
information bar (lower part of the display),
when the handling of the System justifies
that.
The information bar is cleared if/when a
new message is displayed, or after time.
The latest sent message is shown.
When pushing the information bar, shown in
Fig. 5-4), a pop-up window appears see
Fig. 5-5.
X
WARNING
The Warning pop-up window disappears
when the user pushes the close button.
Page 132
Operator´s Manual
Advertisement
Table of Contents
