Electromagnetic Compatibility (Emc) - Canon OMNERA 500A Operator's Manual

Hide thumbs Also See for OMNERA 500A:
Table of Contents

Advertisement

Safety

Electromagnetic Compatibility (EMC)

2.14 Electromagnetic Compatibility (EMC)
The system complies with the requirements of IEC 60601-1-2:2014 regarding
electromagnetic compatibility. Surrounding equipment shall follow the standard IEC 60601-
1-2:2014.
WARNING!
Do not use this equipment adjacent to or stacked with other equipment.
Such use could lead to improper operation.
Verify that the equipment is operating normally, if such use is necessary.
WARNING!
Do not use other accessories, transducers and cables than those specified or
provided by the manufacturer.
Such use could lead to increased electromagnetic emissions or decreased
electromagnetic immunity of this equipment and result in improper operation.
WARNING!
Do not use portable RF communications equipment (including peripherals such as
antenna cables and external antennas) closer than 30 cm (12 inches) to any part of
the system, including cables specified by the manufacturer.
Such use could lead to degradation of the performance of this equipment.
CAUTION!
Do not place the system near MRI equipment or other equipment that generates a
strong magnetic field.
CAUTION!
Mobile telephones and other radiating equipment can interfere with the function of
the system and can therefore cause safety hazards.
OMNERA 500A
1000-095-071-EN Rev. 2.1
Page 42
Operator´s Manual

Advertisement

Table of Contents
loading

Table of Contents