User Interface
Display User Interface
The log file may be used for troubleshooting.
It is possible for service personnel to delete the log file which can be helpful when fault
tracing. The refresh button retrieves the latest events.
Delete Log File
Note!
This procedure shall only be performed by service personnel.
Fig. 3-28 Delete log file
Service – Settings
The Service menu shows system set up and system software versions.
A code is required for access to Settings.
OMNERA 500A
1 2 3
4 5 6
7 8 9
0
Fig. 3-29 Menu SERVICE – tab SETTINGS
1000-095-071-EN Rev. 2.1
Page 60
Select Delete Log and enter a four digit
access code to delete a log file.
Operator´s Manual