Installing The Control Panel - Dell XC430 Owner's Manual

Figure 28. Removing and installing the control panel—four 3.5 inch hard-drives chassis
1. control panel
Next steps
1. Replace the control panel.
2. Follow the procedure listed in

Installing the control panel

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the
2. Keep the #2 Phillips screwdriver handy.
Steps
Align the locking tabs on the control panel with the notches on the chassis and angle the control
panel until it snaps into place.
When properly seated, the control panel will be flush with the front panel.
Next steps
Follow the procedure listed in
84
After working inside your
Safety instructions.
After working inside your
2. notches (6)
system.
system.