Installing The Internal Dual Sd Module; Integrated Storage Controller Card; Removing The Integrated Storage Controller Card - Dell XC430 Owner's Manual

Convention
C
D
E
Next steps
Follow the procedure listed in

Installing the internal dual SD module

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Ensure that you read the
2. Follow the procedure listed in
Steps
1. Locate the IDSDM connector on the system board. To locate the IDSDM connector, see
board connectors.
2. Align the connectors on the system board and the dual SD module.
3. Push the dual SD module until it is firmly seated on the system board.
Next steps
1. Install the SD vFlash media card(s).
NOTE: Temporarily label each SD card with its corresponding slot before removal. Replace the
SD card(s) into the same slots.
2. Follow the procedure listed in

Integrated storage controller card

Your system includes a dedicated expansion-card slot on the system board for an integrated controller
card. The integrated storage controller card provides the integrated storage subsystem for your system's
internal hard drives. The controller supports SAS and SATA hard drives as supported by the version of the
storage controller included with your system.

Removing the integrated storage controller card

Prerequisites
1. Ensure that you read the
2. Follow the procedure listed in
3. Remove the cooling shroud.
IDSDM indicator code
Flashing amber
Amber
Not lit
After working inside your
Safety instructions.
Before working inside your
After working inside your
Safety instructions.
Before working inside your
Description
Indicates card mismatch or that the card has
failed
Indicates that the card is offline, has failed, or is
write protected
Indicates that the card is missing or booting
system.
system.
system.
system.
System
69