2.
Follow the procedure listed in
Steps
1.
Locate the internal dual SD module on the system board.
2.
If installed, remove the SD cards.
3.
Hold the plastic pull tab and pull the dual SD module out of the system board.
Figure 19. Removing and installing the Internal Dual SD Module (IDSDM)
1.
Internal Dual SD module
3.
SD card
5.
SD card slot 1
Table 16. IDSDM indicator codes
Convention
A
B
68
Before working inside your
IDSDM indicator code
Green
Flashing green
system..
2.
LED status indicator (2)
4.
SD card slot 2
6.
IDSDM connector
Description
Indicates that the card is online
Indicates rebuild or activity