Setup Menu; View Menu; Diagnostic Indicators - Dell XC430 Owner's Manual

1. Press and hold the up arrow
2. Select the Home icon.
3. On the Home screen, press the Select button to enter the main menu.

Setup menu

NOTE: When you select an option in the Setup menu, you must confirm the option before
proceeding to the next action.
iDRAC Select DHCP or Static IP to configure the network mode. If Static IP is selected,
the available fields are IP, Subnet (Sub), and Gateway (Gtw). Select Setup DNS to
enable DNS and to view domain addresses. Two separate DNS entries are available.
Set error Select SEL to display LCD error messages in a format that matches the IPMI
description in the SEL. This is useful when trying to match an LCD message with an
SEL entry.
Select Simple to display LCD error messages in a simplified user-friendly
description. For more information about error messages, see the Dell Event and
Error Messages Reference Guide at Dell.com/idracmanuals.
Set home Select the default information to be displayed on the LCD Home screen. For more
information to see the options and option items that can be set as the default on
the Home screen, see

View menu

NOTE: When you select an option in the view menu, you must confirm the option before
proceeding to the next action.
iDRAC IP Displays the IPv4 or IPv6 addresses for iDRAC8. Addresses include DNS (Primary
and Secondary), Gateway, IP, and Subnet (IPv6 does not have Subnet).
MAC Displays the MAC addresses for iDRAC, iSCSI, or Network devices.
Name Displays the name of the Host, Model, or User String for the system.
Number Displays the Asset tag or the Service tag for the system.
Power Displays the power output of the system in BTU/hr or Watt. The display format can
be configured in the Set home submenu of the Setup menu.
Temperature Displays the temperature of the system in Celsius or Fahrenheit. The display format
can be configured in the Set home submenu of the Setup menu.

Diagnostic indicators

The diagnostic indicators on the system front-panel display error status during system startup.
NOTE: The diagnostic indicators are not present if the system is equipped with an LCD display.
NOTE: No diagnostic indicators are lit when the system is switched off. To start the system, plug it in
to a working power source and press the power button.
until the Home icon
View menu.
is displayed.
11