Installing The Cooling Shroud - Dell XC430 Owner's Manual

Figure 10. Removing and installing the cooling shroud
1. cooling shroud
3. intrusion switch connector on the system
board
5. guide pin

Installing the cooling shroud

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Ensure that you read the
2. Follow the procedure listed in
Steps
1. Align the following:
a. guide on the cooling shroud with the guide pin on the system board.
b. intrusion switch with the intrusion switch connector on the system board.
2. Lower the cooling shroud into the chassis until it is firmly seated.
When firmly seated, the memory socket numbers marked on the cooling shroud align with the
respective memory sockets.
46
Safety instructions.
Before working inside your
2. intrusion switch
4. guide on the cooling shroud
system.