Figure 16. Processor Installation - Install The Processor; Figure 17. Processor Installation - Remove The Socket Cover - Intel P4304XXMFEN2 Service Manual

Intel ® Server Chassis P4304XXMFEN2/P4304XXMUXX Product Family System Integration and Service Guide
3. Install the Processor.
Note: The underside of the processor has components that may damage the socket pins if installed
improperly. The processor must align correctly with the socket opening before installation. DO NOT
DROP the processor into the socket.
Note: The pins inside the CPU socket are extremely sensitive. Other than the CPU, no object should
make contact with the pins inside the CPU socket.
Note: When possible, a CPU insertion tool should be used when installing the CPU.
Remove the processor from its packaging. Carefully remove the protective cover from the bottom
side of the CPU, taking care not to touch any CPU contacts (see letter "A"). Orient the processor with
the socket so that the processor cutouts match the four orientation posts on the socket (see letter
"B"). Note the location of the gold key on the corner of processor (see letter "C"). Carefully place (Do
NOT drop) the CPU into the socket.
4. Remove the socket cover.
Remove the socket cover by pressing it out of the load plate.
Note: The socket cover should be saved and re-used should the processor need to be removed at
anytime in the future.
26
Figure 16. Processor Installation – Install the Processor
Figure 17. Processor Installation – Remove the Socket Cover