Intel P4304XXMFEN2 Service Manual page 93

Intel ® Server Chassis P4304XXMFEN2/P4304XXMUXX Product Family System Integration and Service Guide
Jumper Name
BIOS Default To reset all BIOS setup options back to factory defaults, power off the system and move this jumper
block to pins 2-3. Power on the system and allow the system to complete the power on self-test
(POST) process. Power off the system. Move the jumper block back to its default position over pins
1-2.
BMC Force Update To place the system in a BMC Force Update Mode, power off the system and move the jumper block
to pins 2-3. When set, this option will disable all but the essential baseboard management functions.
The default setting for this option is to have the jumper block installed over pins 1-2
Jumper Purpose
81