Intel P4304XXMFEN2 Service Manual page 59

Server chassis

Hide thumbs Also See for P4304XXMFEN2:

Table of Contents

Intel

Server Chassis P4304XXMFEN2/P4304XXMUXX Product Family System Integration and Service Guide

4. Connect the NVMe cables to the NVMe add-in card and the 8x2.5" SAS/PCIe SSD (NVMe) Combo

backplane. The cables can be found in FUP8X25S3NVDK.

5. Connect the I2C cable from the mother board HSBP_I2C header to the backplane I2C_IN (SMBus-in)

header.

6. If regular SATA/SAS drives will be used in drive slot 0-3, connect the "miniSAS HD to miniSAS HD"

cable to the backplane connector G. If SATA/SAS drives will be used in drive slot 4-7, connect the

"miniSAS HD to miniSAS HD" cable to the backplane connector B. The other end of the miniSAS HD

connector can be connected to the mother board connector "sSATA_0-3", "SATA_0-3", "SAS_0-3",

or "SAS_4-7".

Below figure shows the backplane connectors.

Table of Contents

P4304xxmuxx